Earth Pit Cover

The Earth Pit Cover is used for the function of earthing method. The Engineering Product Consultancy covers the earthing rod from being destruction, which is caused due to climate problem. Earth Pit Cover gives the total safety and the evaluation point to the earthing system in the manufacturing as well as in the commercial areas.

Its main purpose is to cover the earthing method by protecting the earthing electrode rods since when electrical power get transmit into the grounding levels through the grounding electrode rods.

Earth Pit Cover is manufactured of high quality of raw materials which is made of HDPE/ HDPP polyethylene for the extra efficient.  The Earth Pit Cover is used to safeguard the earthing.

Previously earth pit cover was manufactured from concrete which was heavy in weight and required interval maintenance but now a day’s earth pit cover is so light-weight and very considerably ductile in design, that it doesn’t need any routine maintenance in such a short time period.  That’s why it is major accountability and maintenance free in nature. Earth pit covers have a higher possibilities to get tough in all weather conditions.

It is used as a cap of electrode, where it covers the electrode to secure the earthing.  It has 2/4 Affect out for accessing cable / strip. As well as it has high load keeping capability up to 28 tones to maintain it high productivity at the time of earthing.  It poses an auto secure option

The Earthing Inspection Cover or the Earth Pit cover is known for the high level of effectiveness. It is ecological friendly, possess heavy duty, climate proof and chemical resistant material of the polyplastic.

Thus how the Earth pit cover allows to protect the electrical earthing at the time of electrical scattering below the ground level via - through the electrode rods from certain weather conditions changes.

MAINTENANCE FREE EARTHING MANUFACTURER

Maintenance free Earthing has emerged as one of the modern age earthing. In this type of earthing watering and inspection is not required that frequently  as it was required in conventional type of earthing.

This is also known as chemical earthing. Two types of technologies are commonly used for manufacturing of such earthing , one is Pipe in pipe technology while other is strip in pipe.

Pipe in Pipe technology – In this one big size pipe and one small dia pipe is used and space between both the pipes is filled with highly crystalline conductive material and this is pressurized filled with specially formed machine made for this purpose and both the ends of the pipe are sealed properly.

Strip in Pipe technology – In this type of technology one strip is kept in between a pipe and space between pipe and strip is filled with CCM.

SG Earthing electrode is one the premier earthing manufacturer of Maintenance free earthing and we make GI earthing , Copper earthing , Copper bonded pipe earthing and copper bonded rod type earthing.

Copper bonded rods are available in 14.2mm , 17.2 mm and 25 mm in 2m & 3m length, while GI and copper pipe earthings are available in 50mm, 76mm, in 2m and 3m length while can also be made as per customer own requirement.

Maintenance free earthing consists of both side sealed electrode and ground enhancing compound. 25 kg Gem is supplied with 2m electrode while 50 kg compound is supplied with 3m electrode.

Installation of earthing : 6 inch dia hole is digged out and electrode is placed in center of hole then GEM is mixed with water and poured into hole in slurry form.

GEM manufactured by us is hygroscopic g in nature and can retain 8-10 times of water for very long time therefore this type of earthing is also known as chemical earthing.